Lo stabilimento di Monaco inizia la preparazione per la produzione della i3 che avrà inizio a Luglio 2026.

Comunicato stampa

Warm-up for Neue Klasse at BMW Group Plant Munich: Functional checks of new production equipment successfully completed

Munich. BMW Group Plant Munich is ready for the production of the next vehicle generation. The manufacturing equipment has been installed in the new body shop and assembly line, and functional checks have been successfully completed. During this so-called "Common Function Test," every system undergoes dry runs, in which production planners and plant technicians put the machinery through its paces. All production steps are executed without any parts in the system. Cycle by cycle, an invisible vehicle takes shape. Although no actual car is produced, this process provides the certainty that everything operates seamlessly and as planned.

Peter Weber, head of BMW Group Plant Munich, is delighted: “Just in time for the holidays, we have reached an important milestone: All manufacturing technologies and equipment are ready to go, and we are already training our associates for production of the BMW i3. We are taking major strides towards production of first pre-series vehicles, which will then come completely from our plant.”

However, plant employees will have to remain patient a little longer until then. BMW i3 assembly, which has so far been carried out at the nearby Research and Innovation Centre, will be relocating to Plant Munich in January. With this move, all technologies at Plant Munich are then in place to continue rigorous testing of the complete production system. Series production of the new BMW i3 will then ramp up in summer 2026.

Typical iFACTORY: digitally planned and tested

Plant Munich is consistently aligned with the guiding principles of the BMW iFACTORY. Both the new body shop and new assembly line were digitally planned and built from the outset. Existing installations in the press shop and paint shop are also integrated into the BMW Group’s Virtual Factory. This made it possible to conduct functional testing of all technologies for the new vehicle generation virtually and well in advance.

Extensive remodelling completed in just 18 months

In just 18 months, about a third of the plant grounds has undergone extensive remodelling. Old halls were dismantled, and a new assembly, logistics centre and body shop were built – all while still manufacturing up to 1,000 BMW 3 Series and 4 Series vehicles per day. Series production of the new BMW i3 is scheduled to begin in the second half of 2026.

Via BMW.

On 09/12/2025 at 22:45, 4200blu scrive:

solo questa, G51 non ci sara piu.

Questa? Schluß?

Come ho capito io si, ma non so perche, vende una bomba come so io. Qui in Germania mi sembra che quest'anno di M3 ne ho viste solo le Touring.

1 ora fa, Felis scrive:

Questa? Schluß?

Solo bev, touring ice finira con la G21.

Beccata a una stazione di ricarica,

La NA0 ha la stessa potenza di ricarica massima della NA5, ovvero 400 kW, a condizione che la colonnina di ricarica sia in grado di erogare tale potenza.

Si avvicina la presentazione?

L'avvio della produzione è luglio '26.

Se non vado errato in BMW presentano sempre dopo o a cavallo della SOP. Quindi o giugno o settembre, quest'ultima la più probabile secondo me.

Iniziano ad uscire le prime pre-serie della i3 dalla linea dello stabilimento di Monaco:

Comunicato stampa

Major milestone: First pre-series vehicles for new BMW i3 roll off the assembly line at BMW Group Plant Munich

Munich. BMW Group Plant Munich is entering the next phase, as the plant launches production of the first near-series test vehicles for the new BMW i3*. This marks the beginning of the final preparation phase for the start of series production in the second half of 2026.

“Production of pre-series vehicles is an important milestone for our plant,” says Peter Weber, Head of BMW Group Plant Munich. “For the first time, we have built a BMW i3 entirely at our plant – using state-of-the-art manufacturing technology and digitally connected processes. With production now close to series maturity, our logistics and production processes are performing under real-world conditions across all technologies: in our modernised press shop, the new body shop, the state-of-the-art paint shop and the new assembly area, as well as the innovative logistics structures. Over the coming months, we will apply the lessons learned from the ramp-up to further refine the processes for series production and ensure a smooth series launch.”

On the road to series production

Integration of new models begins with pre-series vehicles – a crucial step in gearing up for future series production.

What makes Plant Munich unique is that a team from the facility has so far worked alongside a team from the nearby pilot plant to assemble the first vehicles at the Research and Innovation Centre. With the completion of Plant Munich’s new manufacturing and logistics areas, vehicles now pass through all production steps on site. This means that all logistics processes, manufacturing equipment and operations must already run smoothly. Although quantities are still small, all parts are supplied via the designated material flows and processed on the production line. Every part and every production step is closely scrutinised. A particular focus is on the approval inspection for cutting-edge production equipment and tools, and on how these are digitally integrated with existing systems.

Running system tests for the future vehicle model helps identify further potential for optimisation. In the coming months, efforts will be directed towards refining processes, based on the insights gained.

Employee training – first virtually, then in the real world

During this phase, employees will also undergo intensive training: until recently, using augmented reality and now, on the new installations and machinery. Close cooperation across all areas of production will ensure operations are seamlessly integrated for a smooth and successful series launch.

Via BMW.

Modificato 11 ore fa11 ore fa da Osv